Skip to article
Custom T Shirt Articles, News & Guides

Planning Shirts for a Gym Competition: What Our Worst Fails Taught Us

UNITEE owner Joel Hebert shares two of the shop's worst competition print jobs and the shirt timeline his team now builds for every event.

Start competition shirts three to five weeks ahead of athlete check-in and pay for the final order roughly three weeks out. Build in time to test foil or other specialty effects, count on having shirts in hand two to three days early, and know your backup plan before anything breaks.

Most advice on how to plan a gym competition covers programming, judges, heat schedules and sponsors. Shirts get a line in the budget and little else, which is strange when nearly everyone in the building ends up wearing one.

Today our team runs gym competition shirts as a planned service with a tracked production standard, but we didn’t start there. Early on it was just Tanya and me, and we made mistakes that cost us sleep, money and very nearly an event.

I’m sharing two of the worst ones because you learn far more from failure than from a highlight reel. Every lesson in them applies to anyone organizing a competition. The first story starts with a cruise, though the cruise wasn’t the mistake. Leaving without enough backup plans and resources lined up ahead of time was.

01 / The first fail

Ragin’ Games 2017: Two Weeks Out, We Booked a Cruise

In 2017, Tanya and I were running the business by ourselves and working close to 20 hours a day. I had recently left my agency career to do this full time, thinking it would bring more balance. It did the opposite and tied us both up even more.

That year we were offered the job of printing for Ragin’ Games, a large regional competition in Louisiana. We hadn’t taken a vacation in years, so we booked a cruise two weeks before the event. The plan was to finish the job three weeks out and leave with time to spare, which sounds sensible until you see what happened next.

We teamed up with a talented gym industry designer who lived nearby, and the design called for a special press setup. Our recently purchased automatic press sat in our garage, waiting on parts that were on back order. With the deadline closing in, I made do with what we had.

The early test prints didn’t look right to either of us. Rather than push ahead, we asked another local printer with a brand-new press to print the rest of the job to our guidelines. We let our clients know we’d be away, turned off our phones and left on the cruise.

We went to pick up the shirts the day before the competition, and something looked off right away. The other shop had set up the job and then handed the printing to a young high school worker, a task that takes several hours. He applied too much glue, and every single graphic came out warped.

I called the owner to tell him how disappointed I was, then drove I-10 to a distributor in Baton Rouge, about an hour and a half away, for a whole new order of blanks. We didn’t understand cash flow back then and hadn’t been paid for the job yet, so we maxed out our credit cards to cover it.

Thankfully, the other shop agreed to redo the order. I took half the shirts and he took the other half, and we both printed through the night. We packed everything in the morning and got the shirts to the event that same day.

To make it even more fun, we were also booked to print live at the event that day. Somehow we made it through on no sleep, and once the adrenaline wore off, three lessons stood out that still shape how we plan event work.

02 / What it taught us

A Makeshift Setup Works Until the Day It Doesn’t

Each of these mistakes looked small when we made it, and that’s exactly why they’re worth spelling out for anyone planning shirts around a fixed date.

Don’t force a tool to do the wrong job

Making do with the wrong setup can work in a pinch, but it will bite you at some point. Our press wasn’t ready for that design, and every decision after that came from trying to work around it. The same risk applies to any gym thinking about printing its own shirts in-house, because close enough on equipment rarely looks close enough on a shirt.

Plan the backup before you need it

Good planning matters, but a backup plan matters just as much when shirts are tied to a date that can’t move. We had a plan to finish three weeks early and nothing in place if the second shop got it wrong. Once you know who you’d call, where you’d buy blanks and how you’d pay for them, a bad batch turns into a long night instead of a missing order.

Work the problem

When the backup plan still isn’t working, do what the military teaches and work the problem until it’s solved. Nobody at the event cared why the first batch failed. They cared that athletes had shirts, and moments like that force a business to get stronger and better at what it does.

03 / The second fail

WOD GODZ: The 35-Hour Production Shift

I’d love to say we never pulled another all-nighter after Ragin’ Games, but this story proves otherwise. This time we had more people, better equipment and what looked like plenty of time.

WOD GODZ in Shreveport is a large event that drew athletes from across North Louisiana and as far away as Dallas. We were printing for athletes, judges and volunteers, plus a special-edition retail line. We were also booked to print custom pieces live during the event, so our hands were full.

The podium shirts added one more challenge with gold and silver foil, which needs its own setup. Foil works in two steps: we screen print a strong adhesive in the shape of the graphic, then heat press the foil on top. Screenprinting.com’s foil printing walkthrough notes that every shop has to test the process in its own environment, and we were about to find out why.

Everything for the order arrived a week before the event, which felt like plenty of time. That’s only true when everything goes perfectly, and this is where I messed up. Custom manufacturing always carries some unpredictability, because small runs mean a brand-new setup every time.

By Thursday, with event setup on Friday, we had about 70% of the job done. Then I started on the foil, and the next two days went like this:

  1. Thursday, foil tests 1 to 3: the foil wouldn’t stick.
  2. Test 4: we took a break.
  3. Test 5: we started losing real time.
  4. Test 6: it half stuck, but it would never have lasted, so it wasn’t ready for a client.
  5. Tests 7 to 28: by 9:40 that night, we were wondering who you even call at that hour. Ghostbusters? Everyone else was off work.
  6. Test 29: a new method finally worked, at about 10 times the labor.
  7. 11:50 pm Thursday: the whole order should have shipped by now. FedEx’s retail center closed at 8:00, so our shipping specialist couldn’t drop it off, and 30% of the job still needed printing and packing.
  8. Overnight: we printed until morning.
  9. 10:30 am Friday: everything was printed, but it still needed quality control, packing and sorting.
  10. 10:56 am: we pulled 7 shirts that weren’t right and redid them.
  11. 1:43 pm: everything was checked, counted, packed and loaded, with no time left for a courier. Registration opened at 3:00, and that’s when athletes expected their shirts.
  12. 2:15 pm: I’d been at the shop for almost three straight shifts and was delirious, to say the least.
  13. 2:26 pm: we bought a Red Bull, jammed everything into the SUV and drove to Shreveport.
  14. 6:00 pm: we unloaded the shirts with the organizers and took a nap.
  15. 5:00 am Saturday: we set up our printing equipment at WOD GODZ and printed live for 10 hours.
  16. 7:00 pm Saturday: we loaded the SUV and drove home.

We made it, but only just, and every shirt that went out was right because we refused to send the ones that weren’t.

04 / What it taught us

A Week Is Plenty Only if Nothing Goes Wrong

The moral of that weekend is that things won’t always go your way, and proper planning builds the buffer that gives you time to get every shirt right. Three parts of that buffer get skipped more than any others, so they’re worth calling out one by one.

  • Test time for anything new: Foil, metallic ink or any effect your printer hasn’t run on your design needs a test print before the production clock starts. Twenty-nine tests should never happen on the Thursday night before an event.
  • Quality control as its own block: Checking, counting and packing took us more than three hours, and that step caught 7 shirts we’d never want an athlete to wear.
  • The gap between shipped and in hand: Our shirts were finished before the event, but FedEx’s 8:00 closing time meant finished no longer meant there. Plan around the day shirts reach your hands, not the day they leave the shop.

Both stories point to the same fix: a shirt timeline built backward from the moment athletes pick up their shirts, with room for each of those steps.

05 / The plan

How Far in Advance Should You Order Event Shirts for a Competition?

Give the shirts themselves three to five weeks before athlete check-in, and have the final order paid about three weeks out. Start the decisions earlier when the event has specialty effects or several shirt groups to dress.

That window fits inside the wider event plan. CrossFit’s 2024 Ask a Coach suggests planning a member-only competition two to three months ahead. For large events, Gymdesk’s 2025 guide to hosting a competition puts the planning window at 12 to 18 months.

Our standard is nine business days from processed payment to ship-out, with transit on top. Our tracked turnaround numbers show we averaged about seven days in 2026. The table below works backward from athlete check-in and shows what went wrong for us when each step slipped.

Time before check-in What gets locked in What happened when we skipped it
5 weeks Every shirt group, any specialty effect, sponsor logos and the printer Ragin’ Games: a special setup our press wasn’t ready for
4 weeks Artwork approved on the actual garment colors, plus a test print of any foil or specialty effect WOD GODZ: 29 foil tests squeezed into one night
3 weeks Final sizes from registration, counts per design and payment, which starts the nine-business-day clock Both: no slack left once something broke
1 week Shirts ship and travel to you WOD GODZ: the order missed FedEx’s 8:00 cutoff
2 to 3 days Shirts in hand, counted and sorted by group, with a backup plan ready Ragin’ Games: warped graphics found the day before

Rush orders can happen, but they depend on blanks, artwork and press capacity. Treat them as your backup, not your plan.

06 / Everyone on the floor

Athletes, Judges, Volunteers and Merch: Lots of Moving Parts, One Package

Every competition order has a lot of moving parts. Athletes, judges, volunteers, podium finishers and the merch table each need something different, and some of those shirts run on tighter timing than others. Our job is to pull all of it together into one clean package for you, however complicated it gets on our end. Here’s what our team manages behind the scenes:

  • Athlete shirts get top priority because they’re tied to check-in. We line the order up with your registration, so the size window closes before the order deadline, not after it.
  • Judge and volunteer shirts need to stand out on a busy floor. The volunteer tee we printed for a Texas throwdown used a stacked layout so athletes could spot the crew when they needed a judge or a water refill.
  • Podium shirts carry the specialty effects, so they get the earliest test print on our schedule.
  • Retail and special-edition shirts carry the most inventory risk. Selling them through preorders and limited-run webstores before the event saves you from guessing sizes.

You deal with one order and one timeline while we handle the rest. Our minimum is 16 pieces per design, and the reasoning behind that number is worth a look before you split one event into lots of separate designs.

07 / Local or specialist

Should You Print Competition Shirts With a Local Shop?

Going hyper-local with your event shirts can make sense. If a shop down the street sponsors your gym or already prints your team tees, keeping the job close supports a relationship worth having.

In our experience, though, we can often match that turnaround and give you a far more specialized experience, simply because we’ve printed for so many fitness competitions. We already know how check-in timing, podium effects, staff shirts and merch drops fit together, so your event never becomes a printer’s learning curve. Our guide to comparing local shops, print-on-demand and specialists covers the wider trade-offs.

08 / Today

Where We Are Today

We design and print in-house. From 2017 to 2020, it took us three attempts at bringing screen printing automation into the shop before we finally got it right. We’ve since moved into a larger building and invested heavily in digital equipment and a support team we wouldn’t trade.

To be honest, we could probably be a little more profitable without the full staff and some of that in-house equipment. But part of the reason we made all those capital investments was to make sure those two event fails never, ever happen again. We also track every job against our nine-day standard, so the dates we give organizers come from records, not hope.

We still look for a way to help when a date is tight. The difference now is that we plan the buffer first, test anything new before the clock starts and keep a backup ready, so the all-nighters stay in stories like these.

Tell Us When Athletes Check In. We’ll Plan the Shirts From There.

Send us your event date, check-in time and every group you need to dress. Our team will build the shirt timeline backward from that moment, test anything new early and keep a backup ready, so you can focus on running the competition.

Lock in your event date now and get your competition shirts on the schedule before the calendar fills up.

Tell Us About Your Event · See Competition Shirts We’ve Printed

Frequently Asked Questions

What should a gym do if competition shirts arrive wrong right before the event?

Call the printer the same day and ask whether they can reprint and source fresh blanks in time. Put athlete shirts first, since check-in can't wait, and move retail to a later pickup if you have to.

How much extra time do foil or metallic podium shirts need?

Ask for a test print when the artwork is approved, before the production clock starts. Foil results change from shop to shop, so a few spare days for testing cost far less than a night of failed runs.

Should judges and volunteers wear a different color from athletes?

Yes. Athletes need to find a judge in seconds, so staff shirts work best in a color that contrasts with the athlete shirt, with the role printed large on the back.

Sources & References